• Career
    We are constantly looking for talented individuals who love to be challenged and crave ceaseless opportunity within an innovative technology enterprise :
    • Senior Mechanical Designer / Project Supervisor (2016-03-17)

      Recruitment number: 2
      Working experience: 10 years or above
      Education: Bachelor degree
      Job responsibilities:
      1 responsible for the design of complex and precise mechanism;
      2 solve the related problems submitted by the project team;
      3 guide the project team members to complete the core process module and the design of the organization;
      4 provide theoretical support for related project design;
      5 provide theoretical and practical support for the assembly of the project;
      6 to control the progress of a number of projects;
      7 responsible for the audit work of the project team;
      8 responsible for the design and guidance of major projects;
      Job requirements:
      1 master the profound theoretical knowledge of mechanical and electrical;
      2 have rich knowledge and practical experience in machining process;
      3 have a good overall view of automation equipment;
      4 has a wealth of analysis and problem solving skills;
      5 have a wealth of process knowledge and be able to carry out practical guidance;
      6 with a wealth of experience in the installation and commissioning;
      7 has a wealth of comprehensive analysis capabilities;
      8 experience in the design of precision mechanical equipment.
      Other requirements:
      1 Bachelor degree or above;
      2.10 + years experience in mechanical design.


      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • Robot research and development project (2016-03-17)

      Recruitment number: 1
      Working experience: 2 years or above
      Education: Master
      Job responsibilities:
      6 on the 1 axis industrial robot and Delta parallel robot kinematics analysis and research, write a theoretical document and the development of software modules;
      2 support R & D test requirements;
      3 project programming, debugging, etc..
      Job requirements:
      1 master degree or above in robot or automation related major (electrical, mechanical, electrical, electronics, instrumentation, computer);
      2 with 6 axis industrial robot and Delta parallel robot's theoretical knowledge, with electronic, electrical basic knowledge;
      3 familiar with Kuka, ABB, Fanuc and other robots in more than one application development, teaching, testing and maintenance, etc.;
      4 have good hands-on ability, independent logical thinking ability;
      5 strong sense of responsibility, have good communication and coordination ability, strong organizational skills.
      6 English level four or above, can work in English communication;
      7 C#/C++ skilled application, proficient in Visual Studio Microsoft, rich software debugging skills
      8 have Control Motion experience;
      9 experience in using robot simulation software is a plus.


      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • System control engineer (2016-03-17)

      Recruitment number: 1
      Working experience: 3-4 years or above
      Education: Master
      Job responsibilities:
      1, according to the company's windows platform for the development and design of equipment software;
      2, participate in software project requirement analysis, design work;
      3, combined with the hardware responsible for the development and testing of software modules;
      4, responsible for the project design and development of products and maintenance;
      5, combined with the user experience, optimize and improve the design process, high quality and complete product design;
      6, according to the custom project development tasks and progress requirements, according to the specification of the software development process and requirements, timely completion of the module and functional development of the preparation of the code;
      7, responsible for the preparation of the relevant R & D documents
      Post qualification:
      1, bachelor degree or above, 3 years work experience;
      2, strong English reading and writing skills, be able to read English technical documents;
      3, strong sense of responsibility, have good communication and coordination ability, strong organizational skills.
      4, love software development work, have a strong study of the spirit of learning
      5, C#/C++ skilled application, proficient in Microsoft, proficient in Visual Studio VC, with visual programming experience and rich software debugging skills;
      6, Control Motion experience is preferred;
      7, honest, honest and trustworthy, with good teamwork spirit.
      The following conditions can be given priority:
      A, there are on-site debugging experience;
      B, mechanical equipment product development experience;
      C, semiconductor equipment development experience.

      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • VC software engineer (2016-03-17)

      Recruitment number: 5
      Working experience: 3-4 years or above
      Education: Master
      Job responsibilities:
      1, responsible for project software design, and electrical engineer to complete the product development;
      2, responsible for the project design and development of products and maintenance;
      3. Responsible for the design and commissioning of the project product;
      4, combined with the user experience, optimize and improve the design process, high quality and complete product design;
      5, according to the custom project development tasks and progress requirements, according to the specification of the software development process and requirements, timely completion of the module and functional development of the preparation of the code.
      Post qualification:
      1, master degree or above, automation, computer, control, more than 3 years work experience;
      2, with visual programming experience;
      3, proficient in VC development tools;
      4, honest, honest and trustworthy, with good teamwork spirit.
      The following conditions can be given priority:
      A, there are on-site debugging experience;
      B, mechanical equipment product development experience.


      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • Assistant Manager of Engineering Center (2016-03-17)

      Recruitment number: 1
      Working experience: 8-9 years or above
      Education: Master
      Job responsibilities:
      Precision Mechanical Engineering Department of the project manager, deputy manager, department management talents, mechanical design management, knowledge management, the effectiveness and efficiency of management, the Department and the enterprise strategic management tools and practical experience, experience of more than 30 successful management of mechanical engineering personnel is required. Requires a team to enhance and cooperate with the enterprise to enhance the rich management experience, bachelor's degree, master's degree is preferred.
      Requirements for the preparation and operation of ISO experience, to have the experience of using a variety of management tools.
      Daily job responsibilities:
      1 responsible for the daily management of Engineering center;
      2 responsible for project management;
      3 to be responsible for the construction of the administrative system of the engineering center;
      Job requirements:
      1 technical background in product development;
      2 have rich experience in project management;
      3 have a wealth of department management experience;
      4 have good communication skills;
      5 experience in equipment development and management is preferred.


      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • Motor Driver Software Engineer (2016-03-17)

      Recruitment number: a number of
      Working experience: 3-4 years or above
      Education: Master
      Job responsibilities:
      1. Responsible for the embedded software design of Brushless DC motor driver
      2, responsible for the servo motor (including stepper motor, AC servo motor, brushless DC servo motor, etc.) driver software design, debugging and coordination;
      3, responsible for the completion of automation and robot system development, testing and related technical documentation;
      4, the preparation of production related documents, with the production sector to produce;
      5, guide trial production and small batch production, the preparation of the test guide for the production process documentation.
      Job requirements:
      1, power electronics, automation, electrical transmission related professional;
      2, a power circuit (motor drive, switching power supply, inverter, inverter) design experience is preferred;
      3, familiar with the C/C++ embedded system development, familiar with the ARM embedded system design;
      4, the work of practical, proactive, attention to detail, in the technical excellence;
      5, proficient in motor drive product software development, successful project development experience is preferred.

      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • MIPS Cadence (2016-03-17)

      Recruitment number: 2
      Working experience: 2 years or above
      Education: Bachelor degree
      Job responsibilities:
      1, PCB circuit design;
      2, hardware development;
      3, project development document management;
      4 equipment alignment and improvement;
      5, project team management and coordination;
      Job requirements:
      1 proficiency in the use of EDA circuit board design software, the design of PCB circuit board;
      2 C language and C++ proficient, skilled hardware programming;
      3 skilled use of one or more ARM microcontroller;
      4 good command of English, can read and understand foreign language materials;
      5 familiar with the internal architecture of ARM and other embedded chips, familiar with the internal structure of each module and control mode.
      6 familiar with CAN, USB, RS485, RS232 bus and related protocols;
      7 have good work habits, can establish the development documents that meet the requirements of ISO;
      8 independently completed projects, familiar with the project management process and elements;
      9 have a strong sense of professionalism and responsibility, to ensure the project time and quality;
      10 physical and mental condition is good, can bear greater psychological pressure, adapt to work overtime;

      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • R&D (software and hardware) Engineer (2016-03-17)

      Recruitment number: 2
      Working experience: 2 years or above
      Education: Bachelor degree
      Job responsibilities:
      Hardware engineer:
      1 responsible for the development of the hardware platform needs analysis, electrical interface design, schematic design, circuit design, hardware debugging, participate in the whole machine link, the preparation of the document, and participate in key technology research and development applications for patents.
      2 responsible for the development of the strategy of the product hardware.
      Two, embedded software engineer:
      1. Responsible for embedded operating system development demand analysis, responsible for the underlying communication protocol (CAN bus, RS485, EtherCAT) development, system (wince, Linux) transplantation, various functions module transplantation and development of, the test of hardware and software, involved in debugging and documentation, and participate in key technology research and development to apply for a patent.
      2 responsible for the development of the strategy of the product embedded software development.
      Three, application software engineer:
      1. Responsible for the development of demand analysis, responsible for the UI design, showing the teaching function (optional C / C + + software, C#, VB, Java), data object layer communication protocol and software testing, join in the whole machine debugging, documentation, and participate in the research and development of key technologies to apply for a patent.
      2 responsible for strategic iterative product application software development.

      Please send resume to:hr@macsem.com,indicate "name + apply for position"

    • senior mechanical engineer (2016-03-17)

      Recruitment number: 2
      Working age: 8-9 years or above
      Education: Bachelor degree
      Job responsibilities:
      1 responsible for the design direction of the automatic equipment;
      2 solve the related problems submitted by the project team;
      3 guide the project team members to complete the design of the 20% core modules;
      4 provide theoretical support for related project design;
      5 provide theoretical and practical support for the assembly of the project;
      6 to control the progress of a number of projects;
      7 responsible for the audit work of the project team;
      8 responsible for the design and guidance of major projects;
      10 responsible for assisting design system construction.
      Job requirements:
      1 master the profound theoretical knowledge of mechanical specialty;
      2 have rich knowledge and practical experience in machining process;
      3 have a good overall view of automation equipment;
      4 has a wealth of analysis and problem solving skills;
      5 have a wealth of process knowledge and be able to carry out practical guidance;
      6 with rich experience in debugging;
      7 has a wealth of comprehensive analysis capabilities;
      8 experience in the design of precision mechanical equipment and equipment;
      9 have a wealth of management experience.
      Other requirements:
      1 Bachelor degree or above;
      2.10 + years experience in mechanical design. Assist Engineering Department Manager establish management system, improve the design rules; perfect employee training system; improve the knowledge management system; perfect the risk in project execution control; responsible for the guidance of each project group of technical difficulties and solve; as a technical committee members of each project to assess; responsible for the project mechanical drawings audit; responsible for major projects design and guide the work; maintenance standard design library and standardized design platform construction.
      3 familiar with the ISO9000 document establishment and management process, standardized management experience
      4 organizational team learning and knowledge experience summary of the ability
      5 strong writing skills, able to independently complete the project and the company's documents, files, reports, etc.
      6 strong work Octavia, early detection and control of project time and cost risk
      7 electrical control management experience, to understand the optimization of mechanical and electrical system configuration, understanding of software programming
      8 strong sense of responsibility, initiative, strong communication skills, with team work experience, able to work in a meeting


      Please send your resume to:hr@macsem.com,and indicate "name + apply for position"

    人妻无码专区精品_国产乱理伦片在线观看夜_综合无码国产一区_天天澡天天添天天爽97